Jogler Direct-Reading Level Gauges are the simplest, most reliable way to determine the level of liquid in a tank or vessel, because they give you a direct view without compromising the integrity of your process system. Jogler level gauges are installed so that the liquid level in the transparent sight tube is always the
same as the liquid level inside the tank or vessel. Jogler direct-reading level gauges can be used at operating pressures up to 300 psi. For higher operating pressures, use Jogler Magnetic Level Gauges.
Exclusive, patented features for maximum safety and zero maintenance
Jogler level gauges are simple: the only components (not including mounting hardware) are the armored shield, the sight tubing, and two self-sealing Super-Seal inserts. These products are maintenance-free, because only the Teflon Super-Seal inserts and the borosilicate sight tubing are exposed to process fluids. Once the gauges are installed, they do not have to be removed and disassembled for inspection or cleaning. Standard shields are epoxy-coated carbon
All Jogler level gauges incorporate patented PTFE Teflon Super-Seal inserts, which seal on the outside diameter, not the ends, of the sight tube. Since Super-Seal inserts allow sight tube movement without leaking, stresses caused by differential expansion between the sight tube and the housing are eliminated. There are no elastomer seals or o-rings to inspect and replace: Super-Seal inserts last the life of the sight tubing.
Jogler gauges are quality ensured to exceed performance requirements with maintenance-free service. JoglerIs Quality Program (JQP) is based on national (ANSI/ASQC) and international (ISO 9001) guidelines. The JQP monitors product quality and preserves material traceability. Systematic reviews of vendors, materials, processes, and product construction are consistently evaluated by management for improvement through technical innovation.
Jogler Direct-Reading Level Gauges are approved by Factory Mutual System or 3A Sanitary.
Single-section Jogler level gauges are easy to install because they are shipped fully assembled. Jogler level gauges are available in lengths up to 10 feet, so there are no staggered fitting or complex piping to contend with, as with conventional multi-section level gauges.
Models for all applications
General service at or near ambient temperatures:
Model LS Single Tube
Sanitary or corrosive service at ambient temperatures:
Model ULSS Sleeved Unigage
Cryogenic or hot process conditions:
Model LT Tube-N-Tube
High-purity or highly corrosive products, cryogenic or hot process conditions:
Model ULTS Tube-N-Tube Unigage
Jogler direct-reading level gauges are used by leading companies in a wide range of applications.
Many accessories are available to customize Jogler direct-reading level gauges to specific applications.